Brightsign Object Reference Manual (FW 5.1) Bedienungsanleitung PDF herunterladen (Seite 54)

100

101

set_volume: Volume functions as a percentage and therefore takes a value between 0-100. The volume value is clipped

prior to use (i.e. SetVoume(101) will set the volume to 100 and return True). The volume is the same for all mapped

outputs and USB/SPDIF/analog.

Note: Separate volume levels are stored for roAudioPlayer and roVideoPlayer.

set_channel_volumes: You can control the volume of individual audio channels. This volume command takes a hex

channel mask, which determines the channels to apply the volume to, and a level, which is a percentage of the full scale.

The volume control works according to audio channel rather than the output. The channel mask is a bit mask with the

following bits for MP3 output:

• &H01 Left

• &H02 Right

• &H03 Both left and right

Example: This code sets audio output to the rightmost expansion moduleaudio port.

video = CreateObject("roVideoPlayer")

video.SetAudioOutput(0)

video.MapStereoOutput(3)

Example: This code sets the volume level for individual channels.

audio = CreateObject("roAudioPlayer")

audio.SetChannelVolumes(&H01, 60) ‘left channel to 60%

audio.SetChannelVolumes(&H02, 75) ‘right channel to 75%

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 340 341

Kommentare zu diesen Handbüchern

Keine Kommentare

Brightsign Object Reference Manual (FW 5.1) Bedienungsanleitung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Brightsign Object Reference Manual (FW 5.1)